|
Blum
Tandem Undermount, Full Extension Drawer Slides
75 lb. Rating,
(100 lb. static)
Our
undermount, full extension drawer slides mount
directly to the side of your cabinet and connect
to the under side of the drawer. These slides
require a notch & mounting hole to be drilled
in the rear of the drawer for mounting.
If you are ordering dovetail drawer boxes from us,
we
can provide the notching & pilot hole boring
service. Order item number: Blum Notch
($5.75/box)
|
|
|
|
Blum
Tandem Slides come in 4 lengths. Since the slide
is totally concealed (see picture above-left) then
the length of the slide & the length of
the drawer must be compatible. Use the information
below to match slide length to a drawer length.
|
|
-
To
calculate drawer width when you know your
opening width use the information below.
-
If
your drawer side thickness is 5/8" (like ours)
deduct 3/8" from your opening.
-
If
your drawer side thickness is 9/16" deduct
9/16" from your opening.
-
If
your drawer side thickness is 1/2" deduct
5/8" from your opening.
|
|
|
Please
note that these are sold in pairs. One complete
set INCLUDES two slides (of size ordered) AND two
locking devices (left and right). |
|
#DSUM21
Kit
21
1/2" Drawer Slides and Locking Devices
Drawer
must be 21" long
Minimum
inside depth clearance is 21 7/8" |
TANDEM 562H |
$40.50 |
|
TANDEM 562H Plus Blumotion |
$44.50 |
#DSUM18
Kit
18
1/2" Drawer Slides and Locking Devices
Drawer
must be 18" long
Minimum
inside depth clearance is 18 7/8"
|
TANDEM 562H
|
$33.50 |
|
TANDEM 562H Plus Blumotion |
$38.50 |
#DSUM15 Kit
15
1/2" Drawer Slides and Locking Devices
Drawer
must be 15" long
Minimum
inside depth clearance is 15 7/8" |
TANDEM 562H |
$32.50 |
|
TANDEM 562H Plus Blumotion |
$37.50 |
#DSUM12 Kit
12
1/2" Drawer Slides and Locking Devices
Drawer
must be 12"long
Minimum
inside depth clearance is 12 7/8" |
TANDEM 562H |
$32.50 |
|
TANDEM 562H Plus Blumotion |
$37.50 |
|
#DSUM-Socket
(Rear Mounting Sockets)
These
sockets mount onto the rear of the slide &
will allow 3/16" to 1 7/8" of flexibility in
mounting. They are intended for face frame mount,
floor mount or center drawer mount applications
only.
 |